Notifications
Clear all
Topic starter
Hi everyone,
We are looking for a welder to do some decorative iron work on the East End, any suggestions would be greatly appriciated. The new gates across from Blue Water look great, anyone know who did those?
Thanks
Posted : June 30, 2014 7:50 pm
Contact Mike Walsh on STX at Walsh Metalworks. I know he's a great artist + metalworker. 773.8169
Here' s a good article:
Walsh Metalworks article STX Source
Posted : July 1, 2014 5:00 pm
I would recommend Winston Joseph, HIs shop is mid island. He did our gates, fence and pool entrance gates in decorative iron and they turned out beautiful. We received a number of quotes for our work and had a look at quite a bit of his work before selecting him.
He was less than 1/2 the price of Walsh Metal works and Wesco and they were done on time for the price he quoted..
He also provides great service at a very reasonable cost. .
(340) 778-9891
Posted : July 1, 2014 7:38 pm
Topic starter
Thank you both, this is a great help, I will contact them both and see what's what.
Posted : July 1, 2014 7:40 pm
You may also want to try Jay at Barbarian Tool Company. 340-718-9544 or 340-513-8642.
Posted : July 2, 2014 2:15 pm
Topic starter
Thanks for all the help. appriciate it.
Posted : July 3, 2014 7:25 pm
Is there another phone number for Winston Joseph? I have been trying the above number for a couple of days, but only get the standard voice message, which doesn't even state his name.
Thanks.
Posted : February 12, 2015 12:13 pm
