Notifications
Clear all
Topic starter
Hi!
Can someone do me a favor and check the price of plywood and galvanize for me? I am not sure of dimensions...i guess enough for a 16x16 area.
Thank you soooooooo much!
Posted : June 30, 2009 7:31 pm
You'll need to be more specific I'm afraid. What thickness of plywood do you need? Treated/untreated?
As an example I shopped around for a couple of sheets of 4' x 8' 3/4" plywood last month and found a lot of variation. I ended up buying untreated (needed it for the platform for a memory foam mattress) for $30 per sheet at the place in La Reine on STX which was significantly cheaper than anywhere else.
Posted : June 30, 2009 9:51 pm
for roofing materials in STT - I always recommend the products and service at MSI in Crown Bay -- 340-776-8800
Posted : June 30, 2009 10:26 pm
Check out the yellow pages for building supply and roofing supply companies. You should find this useful for lots of other things too.
I think we just paid $37 for a sheet of treated ply 3/4 inch, at the same place. 1/2 inch is usually around $50+ or so.
Posted : June 30, 2009 10:47 pm
Check out the yellow pages for building supply and roofing supply companies. You should find this useful for lots of other things too.
I think we just paid $37 for a sheet of treated ply 3/4 inch, at the same place. 1/2 inch is usually around $50+ or so.
Maybe the other way around!
Posted : June 30, 2009 11:48 pm
then you get into the grade as well...a/a. a/c, b/c, etc...
Posted : June 30, 2009 11:49 pm
Oops, right Dun! Thanks.
Posted : July 2, 2009 1:43 pm
